Full Stave European Walnut Worktop 35mm By 750mm By 1700mm
Full Stave European Walnut Worktop 35mm By 750mm By 1700mm
Crafted with precision and sophistication, our Full Stave European Walnut Worktop measures 35mm by 750mm by 1700mm. This worktop, baring a Natural grade, boasts an impressive manifestation of Walnut species specially selected for its superior quality. The enduring strength of Walnut, combined with the sought-after Full Stave style, creates a stunning, durable work surface perfect for any domestic or commercial application.
In this Full Stave European Walnut Worktop, the beauty of nature meets practicality and functionality. Our worktop showcases:
- High-quality Natural grade Walnut
- Full Stave style displaying uninterrupted wood grain
- Dimensionally stable and durable surface for a range of uses
- Large working area with dimensions of 35mm by 750mm by 1700mm
- A versatility that suits it to kitchens, home offices, shelves, and table tops
The Full Stave European Walnut Worktop is the perfect blend of style, durability and convenience. Its warm, rich hues and distinctive grain patterns contribute to a work surface that is as appealing aesthetically as it is practical. This worktop can serve as the stunning focal point of a kitchen, or as a sturdy, attractive surface for a home office desk, shelves, or a table top. With this kind of versatility, the Full Stave European Walnut Worktop may just be the stylish, practical addition you've been searching for.
We strongly recommend to schedule the delivery max 2-3 days before the fitting.
Please ensure that your Worktops are completely re-wrapped after inspection and stored on completely flat and level surface, with bearers in between (this will allow the air to circulate between the worktops and prevent deflection). Do not store worktops vertically or on edges.
All worktops need to be kept inside your house (not in a garage or any other outbuilding). During storage, please make sure that they are kept well away from extreme heat (radiators, underfloor heating AGA’s and intense direct sunlight etc) and kept away from any moist areas (recently plastered walls, dump basements etc). All wet trades should be finished and a sufficient period of time allowed for natural drying out before storing hardwood worktops in the same room. Allow the worktop a day or so to adjust to the ambient temperature and humidity of its new surroundings prior to installation.
If you wish to store your worktops for a long period, you should turn them every other day to prevent cupping or bowing.
Wood is a natural product and may have significant colour variation, and whilst every effort is made to colour match as much as possible, we cannot guarantee any consistency of colour from one worktop to another.
The worktop’s appearance will be according to the grading mentioned, the grading refers to the top side only the bottom side can be lower grading with wood filler.
The full stave worktop is solid wood which can be affected from the humidity in the room and some time during the year the wood can have some small cracks which will disappear when the humidity is higher.
Please download and read carefully the following instruction guide
Wood and Beyond’s solid wood worktop surfaces are constructed from 40mm up to 120mm wide staves.
Carefully crafted from the highest quality raw materials to provide maximum strength, stability and durability throughout the years of service the worktop will provide.
The full stave worktop is made from staves of solid wood which are then cut, graded and kiln dried to ensure a moisture level suitable for domestic interior.
These materials are then glued together to form one homogeneous panel of wood which is stable and durable.
Full stave worktop is especially designed for interior use and will easily handle the day to day use required from a kitchen or bar worktop.
Free sample is available to order. We charge £1.80 delivery which will be refunded once you've placed your order with us.
The sample will allow you to feel the high quality wood and see its beautiful rich markings.
Simply choose the 'Free Sample' option and complete the secure checkout process.
We aim to dispatch the sample within a day so you won't have to wait long.
The full stave worktop is a semi finished product, before fitting the worktop the carpenter must hand sanding to make the surface smooth without small scratches and ready for the oiling process, cut to size and oil all sides ( 6 sides)Â 3 layers should be applied.
The full stave worktop appearance will be according to the grading mentioned, the grading refer to the top side only the bottom side can be lower grading with wood filler.
The full stave worktop is solid wood which can be affected from the humidity in the room and some time during the year the wood can have some small cracks which will disappear when the humidity is higher.
From time to time we recommend to re oiled the top side.Â