Prime Engineered Flooring Oak Chevron Ribolla Brushed Uv Lacquered 14/3mm By 90mm By 510mm
If you’re on the lookout for a floor that will transform a small or gloomy room, look no further. This Ribolla prime engineered oak flooring in chevron pattern that’s been brushed and UV lacquered will add an illusion of volume and a glow of light no matter where you choose to install it.
Mix this floor with cutting-edge designer furnishings or go more country cottage, it really is up to you. And when it comes to colours, this floor will stand up to the most dramatic dark colours and will also look great with muted pastels. To be honest, this floor is just incredibly versatile.
When you've received your flooring, you should within one hour store it inside, completely flat and in sealed boxes until you are ready to lay it. Boxes should be kept inside your house (not in a garage or other outbuilding). During storage, please make sure that your flooring is well away from extreme heat (radiators) and moist areas (recently plastered walls, damp basements etc). We recommend an acclimatizing period of at least one week, during which time flooring needs to be kept in sealed boxes at room temperature. Engineered flooring need to stay in the boxes at the room temperature for 72 hours (for installation without underfloor heating) or 7 days (for installation with underfloor heating) and the room temperature must be at least 21-22 degrees Celsius for 7-14 days - the floor surface temperature must be a minimum of 21 degrees Celsius - the air relative humidity must be between 40% and 65%.
Free sample are available to order. The sample will allow you to feel the high quality of our wood and see its beautiful rich markings.
We aim to dispatch the sample within a day so you won't have to wait long.
Simply choose the 'Free Sample' option and complete the secure checkout process.
We strongly recommend to order a sample and not rely only on the photos on the web.
Due to the nature of the products, description and images should only be used for guidance.
It needs to be installed on top of 100% straight, rigid and even subfloor.Â
When installing on top of screed the screed moisture must not exceed 2%. Please make sure that the fitter will have the correct tools and knowledge on how to check the screed humidity.Â
Â
New Screed: Need to apply 1 or 2 layers of DPM before installation.
You must create an expansion gap of 12-18mm for expansion gap.Â
Floating: When Floating Tongue and Groove system, the tongue and groove needs to be glue together.
Â
We strongly recommend that Engineered flooring must be installed by a professional fitter with all the correct tools and knowledge.Â
Â
We recommend treating your flooring with accordance to our maintenance guides every 3-12 weeks (depends on traffic and need) with the following:
Â
Finish Type
Maintenance product
Frequency
UV Oiled
Every 2-3 weeks especially in areas with high traffic
UV Lacquered
Every 2-3 weeks especially in areas with high traffic
Wax Oiled
Apply 1-2 coats post-installation; additionally apply Ware Care every 2-3 weeks.
Â
Please always try on an offcut or a small corner to see that you are happy with the result before applying on your floor.
Â