Prime Engineered Flooring Oak Bespoke Herringbone Sunny White Brushed UV Oiled 14/3mm By 120mm By 600mm

£49.80 /m² £81.00 /m²
SKU
FL4737
Species
Oak
Oak It is renowned for its durability and longevity, making it a reliable choice for products. Oak wood flooring offers a range of color variations, spanning from light to dark shades
Walnut It is rich chocolate/purplish brown colour is amazing in its richness and is noted for its beautiful grain character, this floor is perfect for the ones who are after a dark unique colour.
Grade
Prime

Please note, for Natural wood products one plank will be different from other planks, the information regarding the grading is a general description of the grading level:

Natural & Natural Sap Expected Allows for sapwood, knots of any size, mineral streaks, wood filler, natural grain pattern, colour variation and any imperfections filled with wood filler.
Prime Has fewer and smaller knots than Eco Prime & Select grade, while still retaining some sapwood, knots, and the acceptance of colour variation and knots ranging from 10-15mm.
Rustic Is vibrant, permitting sapwood, knots of any size, mineral streaks, natural grain, and colour variation. It has a natural grain pattern, with possible imperfections filled with wood filler.
Eco Prime & Select Has fewer knots and wood filler than Natural grade while still retaining some sapwood, knots, mineral streaks, natural grain pattern and colour variation, with possible imperfections filled with wood filler.

"Due to the nature of wooden products, description and images should only be used for guidance." Any knots, splits, or imperfections will be filled by coloured, black, or wood colour filler. Colour Variation can happen from plank to plank in the same box, from box to box and from batch to batch.

Shade
Light
Colour
White
Room
Dining Room, Kitchen, Lounge, Hallway, Bedroom
Fitting
Glue Down, Tongue and Groove
Product Finish
Brushed UV Oiled
Thickness
14mm
Width
120mm
Length
600mm
Suitability
Water Underfloor Heating
Style
Herringbone
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Plank Size
Fixed
Edging
Microbeveled
Wear Layer
3.0mm +/- 0.3mm
Certifications
Read More
Warranty
Read More
Coverage
0.58 m²

Prime Engineered Flooring Oak Bespoke Herringbone Sunny White Brushed UV Oiled 14/3mm By 120mm By 600mm

This Oak Bespoke Herringbone Sunny White Brushed UV Oiled flooring is a premium selection from our engineered flooring range. Spanning 120mm wide and reaching 600mm in length, the 14/3mm thick boards provide a sturdy base for your flooring needs. The planks exhibit a prime grade quality, ensuring the boards are near to perfect with only minor sap and knots present. Their bespoke Herringbone style adds a touch of classic elegance to any interior, while the Sunny White color offers a fresh and modern ambiance.


Key attributes of the Prime Engineered Flooring Oak Bespoke Herringbone Sunny White Brushed UV Oiled flooring are:

  • Oak material inspires natural warmth and texture.
  • Herringbone style adds an elegant and classic touch.
  • Sunny White color adds luminosity and a spacious appearance to any room.

The Prime Engineered Flooring Oak Bespoke Herringbone Sunny White Brushed UV Oiled flooring enhances any domestic or commercial space with its timeless elegance. The distinctive herringbone pattern adds a unique focal point, while the Sunny White color offers a sense of calm and tranquility. Presented in a sleek brushed finish, this flooring is ideal for anyone seeking a sophisticated yet practical flooring solution.


When you've received your flooring, you should within one hour store it inside, completely flat and in sealed boxes until you are ready to lay it. Boxes should be kept inside your house (not in a garage or other outbuilding). During storage, please make sure that your flooring is well away from extreme heat (radiators) and moist areas (recently plastered walls, damp basements etc). We recommend an acclimatizing period of at least one week, during which time flooring needs to be kept in sealed boxes at room temperature. Engineered flooring need to stay in the boxes at the room temperature for 72 hours (for installation without underfloor heating) or 7 days (for installation with underfloor heating) and the room temperature must be at least 21-22 degrees Celsius for 7-14 days - the floor surface temperature must be a minimum of 21 degrees Celsius - the air relative humidity must be between 40% and 65%.

Free sample are available to order. The sample will allow you to feel the high quality of our wood and see its beautiful rich markings.

We aim to dispatch the sample within a day so you won't have to wait long.


Simply choose the 'Free Sample' option and complete the secure checkout process.


We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

It needs to be installed on top of 100% straight, rigid and even subfloor. 

When installing on top of screed the screed moisture must not exceed 2%. Please make sure that the fitter will have the correct tools and knowledge on how to check the screed humidity. 

 

New Screed: Need to apply 1 or 2 layers of DPM before installation.

You must create an expansion gap of 12-18mm for expansion gap. 

Floating: When Floating Tongue and Groove system, the tongue and groove needs to be glue together.

 

We strongly recommend that Engineered flooring must be installed by a professional fitter with all the correct tools and knowledge. 

 

We recommend treating your flooring with accordance to our maintenance guides every 3-12 weeks (depends on traffic and need) with the following:

 

Finish Type

Maintenance product

Frequency

UV Oiled

Wax Care 1L

Every 2-3 weeks especially in areas with high traffic

UV Lacquered

Ecoline Refresher for Lacquered 1L

Every 2-3 weeks especially in areas with high traffic

Wax Oiled

Premium Clear Matt Hardwax Oil 2.5Lts

Apply 1-2 coats post-installation; additionally apply Ware Care every 2-3 weeks.

 

Please always try on an offcut or a small corner to see that you are happy with the result before applying on your floor.

Â