Premium Oak Zebra Worktop 38mm by 650mm by 3000mm
Or call: 0203 869 0900
Our Zebrano Worktop retains all of its natural colouring it has a light golden-yellow with narrow streaks of dark brown to black and it will uplift any kitchen look. Wood and Beyond Zebrano worktop surfaces are constructed from 40mm wide staves, carefully crafted from the highest quality raw materials to provide maximum strength, stability and durability throughout the years of service they will provide. The worktop comes square edged and sanded to a super smooth 150 grit finish. It is supplied unfinished and will require oiling prior to installation. The Zebrano is very durable and strong wood, and it is an excellent choice for the ones who wishes to make a statement with their worktop.
Zebrano Worktop is made from staves of solid wood which are then cut, selected, graded and kiln dried to ensure a moisture level suitable for domestic interior use such as the kitchen. These materials are then glued together to form one homogeneous panel of wood which is stable and durable. Zebrano Worktop is especially designed for interior use and will easily handle the day to day use required from a kitchen or bar worktop. The worktop is very easy to maintain, needing only the occasional oil coating and basic care.
The name Zebrano or Zebrawood comes from the dark stripes on a light background which the wood features. These bear a resemblance to a Zebra hence its name. Its heavy and strong properties together with a rich colour make it extremely popular for the construction of worktops and counter tops.
Why We Recommend Zerbrano Worktops
» Fabulous for making a statement
» By its nature Zebrano is very durable making it perfect as a kitchen or bar counter worktop
» Super high quality wood
Prime is the highest grade of worktops, It has a more uniformed look due to having slight colour variation straight grain and contains very few ( if at all) and infrequent small knots and character marks. The prime grade of this worktops is the most expensive as it is in limited supply from the raw material. The prime grade of this worktops has a uniformed colour and fine markings which will lend elegance and chic to any kitchen making it the ideal choice for any modern settings.
Premium Worktop Construction
Premium Worktop is made from staves of solid wood which are then cut, selected, graded and kiln dried to ensure a moisture level suitable for domestic interior use such as the kitchen. These materials are then glued together to form one homogeneous panel of wood which is stable and durable. The forward facing side of the premium grade worktop will feature only minimal natural imperfections that all natural woods share, resulting in a uniform clean look worthy of premium grade with few small knots. The back side of the worktop (which is of course invisible once the worktop is fitted) will likely display some knots and some colour variation, which is a by product of the manufacturing process. Premium Worktop is especially designed for interior use and will easily handle the day to day use required from a kitchen or bar worktop. The worktop is very easy to maintain, needing only the occasional oil coating and basic care.
Size of board
This specific worktop has a thickness of 38mm, a width of 650mm and a length of 3000mm, giving you fantastic choice and range.
Wood is a natural product and may have significant colour variation, and whilst every effort is made to colour match as much as possible, we cannot guarantee any consistency of colour from one worktop to another.
When you receive your worktops, it is very important to store them completely flat (it is recommended on supporting bearers) until you are ready to install. All worktops need to be kept inside your house (not in a garage or any other outbuilding). During storage, please make sure that they are kept well away from extreme heat (radiators, under floor heating etc) and kept away from any moist areas (recently plastered walls, dump basements etc). Before installation, please make sure you oil your worktops at least three coats on ALL sides including edges, we recommend using Danish Oil or Worktop Oil. After installation, you will need to oil the upper parts of the worktop once a week for the first 6 weeks, then approximately every three month- depending on the usage. This is standard practice for real wood worktops as they are made from natural materials.
Please ensure that your Worktops are completely re-wrapped after inspection and stored on completely flat and level surface, with bearers in between (this will allow the air to circulate between the worktops and prevent deflection). Do not store worktops vertically or on edges. If you wish to store your worktops for a long period, you should turn them every other day to prevent cupping or bowing. Never store worktops in an unheated environment - especially outdoors, in sheds or garages. Keep the worktops dry and away from direct sources of heat such as radiators, boilers, AGA’s, and intense direct sunlight etc. All wet trades (especially plastering) should be finished and a sufficient period of time allowed for natural drying out before storing hardwood worktops in the same room. Allow the worktop a day or so to adjust to the ambient temperature and humidity of its new surroundings prior to installation.
If warping does occur, your worktop can still be screwed down to the base units and the wood will correct itself naturally after a short period (2-3 weeks). Read below for details on how to do this. Your worktops are dispatched in sound condition and it is your responsibility to store and maintain worktops correctly. WOOD N BEYOND cannot be held responsible if due care and attention is not maintained.
If a worktop has become cupped or bowed due to moisture differences on site, or after lengthy or incorrect storage, the worktop will need to be installed differently. Firstly, fix the entire length of the rear of the worktop to the supporting base units. Then gently and gradually, using clamps and battens, pull the worktop downwards before screwing down the front edge. Please be advised that it may take 1-2 weeks for the worktop to completely settle down and resume its completely flat shape. Always leave a suitable gap between the worktop and direct sources of heat such as a Rayburn or Aga.
It is essential to fit protective END-CAPS on worktops, sited directly alongside or near high heat ovens like Aga, Rayburn or Range. As you are aware, these ovens produce intensive heat, and the end caps are protecting the worktop ends from drying out and splitting.
Also, if your worktop is being installed above kitchen appliances that produce a large amount of heat or vapours (washing machines, tumble dryers, dishwashers, boilers or built-in fridges & freezers), then it is highly advisable to fit a moisture barrier/Silver Foil to protect your worktops against these factors.
Free sample is available to order. We charge £1.80 delivery which will be refunded once you've placed your order with us. The sample will allow you to feel the high quality wood and see its beautiful rich markings. We aim to dispatch the sample within a day so you won't have to wait long. Simply choose the 'Free Sample' option and complete the secure checkout process.
Installation & Maintenance
Delivery and Returns
Please note that all our deliveries are kerbside.
- London and Essex £48 for first pannel and plus £18 for any aditional one. Maximum charge is £84.
- Cumbria, Devon, Cornwall and some areas of Wales- please contact us for a quote
- Scotland(excluding Scottish Highland)- please contact us for a quote
- Scottish Higland, Republic of Ireland, Channel Islands, Isle of Man, Isle of Wight - please contact us for a quote
- Any area of England and Wales not mentioned above charges may vary and will be quoted via the system - for further info please contact us.
- For deliveries into Europe please call one of our sales advisors on 0203 8690900 or email us on email@example.com
Returns and refunds
If we receive a cancellation request from you and your products have not been dispatched, we will refund you the full invoice amount within 5 working days of your cancellation request. If we receive a cancellation request from you and your products have been dispatched but not delivered , we will refund you the full invoice amount in full less any direct expenses we may have incurred in fulfilling the original agreement. If we receive a cancellation request from you and you have taken delivery of your products, you must return the products to us at your own expense. All returns have to be made to our warehouse address : CKR Services, Crossways Cargo Centre, Galleon Boulevard, DA2 6QE
For more information about Delivery and Returns please click here.