Rewmar MS Polymer Adhesive

Free delivery is offered for all products in the accessories category when they are ordered with flooring , decking or worktops. We can not deliver any accessories on their own. 

Rewmar MS Polymer Adhesive.
Suitable for bonding many kinds of parquet and wooden floors onto suitable substrates indoor.
Technical data:
Base: MS Polymer
Curing system: Moisture curing
Consistency: paste
Colour: pale brown or dark brown
Specific gravity (g/cm³): approx 1.6
Brookfield viscosity (mPas): approx 72.00 (HBT A/10)
Open time at 21°C and 50% rv: approx 20 -30 min
Adjustability time at 21°C and 50% rv: approx 20 -30 min
Set to load bearing: min 12 hrs
Sanding/finishing: min 12 hrs

Shear strength (DIN281b) wood/wood- > 1N/mm²
Temperature resistance -40°C to +90°C (cured)
Durability against ageing- good
Total solids content- 100% (solvent free)
Application rate- Depending on the subfloor 1000 – 1200 gr/m² by use 6mm V notch trowel
600 – 800 gr/m² by use 3mm V notch trowel

* This can vary according to environmental circumstances such as temperature, humidity, substrate etc.

Characteristics:
- One component Ready to use and easy to apply
- Solvent free
- Water free
- Free of isocyanates
- Forms stable peaks once applied by a notched
trowel or spreader comb
- Rapid build up of bond strength
- Rapid curing
- High final bond strength (according to DIN 281)
- Permanently Elastic
- Suitable for underfloor heating
- Dissipates shear forces
- Easy to remove residues on flooring
- No hazard labelling required
Note: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith. Because
of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any responsibility
for the results obtained. In every case it is recommended to carry out preliminary experiments.